Large Installations (8+ Cases)
Each standard 42W Power Supply Unit (PSU) supports up to 8 Cases. A 75W PSU can power up to 14 Cases. 75W PSUs and cannot be used in the same layout as a 42W PSU.
Activate Power Diagnostic Mode
If you have more than 8 Cases and/or multiple Controllers in your Display Case setup, you will need to use a 75W PSU (purchased separately and cannot be used in the same layout as a 42W PSU). Activating Power Diagnostic Mode will give you tips on where you can place your Power Supplies for optimal performance.
You can Activate Power Diagnostic Mode via the Nanoleaf App by following the instructions below.
Open the Nanoleaf App
For iOS Devices
- Open the MORE menu.
- Select SETTINGS > WARNINGS > Power Limited
For Android Devices
- Open the side menu.
- Select SETTINGS > WARNINGS > Power Limited
Color-Coded Map
A color-coded map of your EXPO Cases will appear in the App. The map will automatically update as you connect or move the Power Supply Unit within your setup.
Distribute Power Supply
Red: Power supply needs to be moved.
Green: Power supply is in good placement.
Blue: Number of missing Power Supplies and the best places for those supplies.
White: Alternative place to add a power supply. The brighter the display case, the better the placement.